Facebook
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml

Car Wash shampoo car wash white foam Concentrate 500ml

No.D03
Wax-based car wash shampoo concentrate in 500 ml. Dilutes 1:200–260 for a foam gun or PA bottle: fine, dense foam and strong slip.
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml
  • Car Wash shampoo car wash white foam Concentrate 500ml

Description

Product Overview

This is a wax-based car wash shampoo concentrate from SURAINBOW, packed in a 500 ml bottle and diluted at 1:200–260 for the foam stage of a contact wash. It is what a bay reaches for when the car is genuinely dirty but the paint is in good order: foam on, a short dwell, a gloved pass over the film, a clean rinse, and then the protection step. Two things have to happen at once in a wash chemical. It has to hold dirt in suspension so the glove lifts it away instead of dragging it across the lacquer, and it has to leave the surface ready for whatever comes next. The wax-based formula works on both counts — that balance is what the foam and the lubrication are there for, and it is the reason the shampoo sits at the start of the sequence rather than at the end of it. Importers and regional distributors use it as the opening step in a car care products range that continues into waterproofing, wax and coating.

Formula & Foam Behaviour

  • Wax-based, not a bare detergent. The wash stage carries wax, so panels come away with slip and a light gloss instead of the stripped, squeaky feel a plain detergent leaves behind.
  • High-density fine foam. The concentrate builds a tight, fine-bubbled foam rather than loose suds, and that structure is what lets the solution sit on a vertical panel instead of running straight off it.
  • Longer contact, fuller reaction. Because the foam stays where it is sprayed, the solution keeps working on road film while you move around the car; more of the dirt is loosened before the glove arrives, and the contact pass gets shorter.
  • "Polishing water wax" lubrication. The formula is built for slip between the wash glove and the paint. Less drag means less wear on the glove and a gentler pass over the lacquer, which is exactly where wash marring starts.
  • Gentle enough for weekly use. As a car wash cleaner it is mild by design: it emulsifies dust film, light road grime and fresh insect marks without a strong alkaline attack, which suits cars that go through the bay often.
  • A foam wash that rinses clear. The foam collapses under a clean-water rinse and sheets off the panel rather than sitting in the shut lines, so there is nothing left to dry into streaks before the next step.

Dilution & Foam Application

  1. Measure before you mix. The car wash and shampoo stage is where most of the dirt should come off, so get the ratio right first: start at 1:200 for heavily soiled cars or hard water and work towards 1:260 for light maintenance washes. A stronger mix does not clean better — it just costs more per car.
  2. Build the working solution. Add the water first, then the concentrate, and stir gently. The foam should be made in the gun, not in the bottle.
  3. Load the foam gun or the PA spray bottle. Either tool works. Set it for a wet, clinging foam rather than a stiff, dry one that slides off before it has done anything.
  4. Spray from the top down. Roof, glass and upper panels first, then the lower panels and sills, in overlapping passes so nothing is left dry while you work. It is the same top-down order used for any foam wash, and it keeps rinse water from running over sections that have not been cleaned yet.
  5. Let it dwell, but keep it wet. Give the foam a short dwell to soften the film; if the edges start to dry, re-wet that panel before moving on. A foam car cleaner only works while it is still liquid on the surface.
  6. Agitate with a thickened wool glove. Work top-down and rinse the glove in clean water between sections. The foam has already loosened most of the film, so this pass should be light rather than scrubbed.
  7. Rinse from the top down with clean water, then sheet the remaining water off so nothing dries in place.
  8. Move on to the protection step. While the paint is clean — and still damp if your waterproofing product allows it — apply the car washing waterproof agent. That is the step this shampoo is designed to lead into.

Colour-Coded Towel Set

TowelWhere it is used
Large towelBody drying and the final wipe-down
BluePaint finish
GreenInterior surfaces
RedGlass
BrownDoor edges and jambs
GrayWheel hubs and engine bay
Set sizeSix towels, one assigned to each zone above
Coding principleThe colour names the zone, so a towel is never carried over into another one
Zone separationWheel, engine bay and door-edge work stays away from paint and glass
Repeat ordersThe same colour-to-zone pairing is kept from batch to batch, so a bay that learned the set once keeps working to it
Towel faceEdge finish and pile depth confirmed with us when the set is specified, so the blue and red towels suit the surfaces they touch

Workshop Scenarios

  • Franchise wash bays and express lines. A car wash and shampoo step that lifts the bulk of the dirt before anything touches the paint is what keeps a volume bay moving; the car spends less time on the ramp and more time in the handover lane.
  • Detailing studios running maintenance washes. Between coating or wax services, a wax-based car shampoo with strong slip suits the car that only needs the film taken off, without a full decontamination.
  • Dealership, rental and fleet prep. Repeatable foam and a short contact pass give a consistent finish before handover, which matters more than an elaborate wash on a car going back out the same day.
  • Mobile detailers and small operators. A 500 ml bottle travels light and is diluted on site, so the weight and the freight sit in the water you add at the customer's address rather than in the stock you carry.
  • Importers and distributors building a range. Most start with the wash shampoo and fill the shelf behind it, which is why car wash soap suppliers carrying a full car care products line can quote a shop in one pass instead of three.

Specifications

Product typeWax-based shampoo concentrate
Item referenceNo. D03
Bottle size500 ml
Foam profileHigh-density, fine-bubble foam
Dilution ratio1:200 – 1:260
Application methodFoam gun or PA spray bottle
Contact washThickened wool wash glove
Lubrication"Polishing water wax" formula
Follow-up stepCar washing waterproof agent
Bottle closureSealed under the cap before first use

Handling, Safety & Storage

Used as a shampoo for car paint that is cleaned every week, this formula stays mild — the risk sits in the habits around it. Mix working solution for the day's cars rather than storing it diluted, because a mix that has stood for days behaves differently in the gun and gives an inconsistent foam. A foam car cleaner left to flash off a hot panel leaves a film that takes longer to rinse than the dirt it lifted.

Keep the bottle closed and upright between uses, store it out of reach of children, and follow the pack notice: in case of eye contact, flush thoroughly with plenty of water. Any car wash cleaner used in a professional bay should be treated the same way — mix fresh, work in the shade, and never let the surface dry mid-wash. For storage conditions, shelf life and the handling requirements of your own market, ask your sales contact for the SDS and technical sheet that apply to your destination.

Sampling, Packaging & Order Flow

  1. Send the brief. Product, target market, pack size, label language, artwork status and the quantity you have in mind. Minimum order quantity, pack format and schedule come back in the quotation, because they move with the bottle, the closure, the label and the total volume, and they differ between a stock SURAINBOW pack and a private-label run.
  2. Sample and approval. Ask your sales contact about sample availability, the sample scope and any applicable sample or courier charges. Evaluate the dilution, the foam and the slip of the shampoo for car washing on your own panels with your own water, then seal the approved sample as the bulk acceptance reference.
  3. Packaging design and proofing. Bottles, closures, labels, cartons and shipping marks are reviewed against your artwork, barcode and label language, and the proof is approved before anything is filled. As car wash soap manufacturers we run this stage under your own brand or as a stock SURAINBOW pack.
  4. Production, filling and checks. The bulk is filled and closed against the approved reference, with batch records, appearance and fill checks, and a leak and seal inspection before the cartons are closed.
  5. Balance, booking and documents. Confirm the balance, the shipping method and the document set before dispatch. SDS, CoA, GHS label information, a composition declaration where the market requires one, commercial invoice and packing list are prepared to suit the destination and the terms you agree.
  6. Dispatch and after-sales. Catalogue items are held in stock and fast shipping applies to them; custom-labelled production of the car shampoo runs to the schedule agreed at order confirmation. Report a leak, shortage or quality concern with the order reference, batch number, quantity affected and photos — packaging issues within 7 days of receipt, product-quality issues within 30 days — so the batch can be checked against the retained sample.

Scale & Supply Capability

SURAINBOW is run by Guangzhou Liangdian Automotive Supplies Co., Ltd., a factory-trade operation set up in Guangzhou in 2010 and now 50 people strong. Sixteen years in car care have given us a one-stop supply position: our own SURAINBOW lines are held in stock for fast shipping, and an associate factory with modern production equipment and an established quality management system keeps replenishment moving. We take OEM and ODM work and our R&D team develops to your specification. Buyers in the Middle East, the United States, Southeast Asia, Europe, the UK, Russia, Africa and Australia already order from us.

FAQ

What dilution should I use, and how far does a 500 ml bottle go?

Start at 1:200 for heavily soiled cars or hard water and move towards 1:260 for a light maintenance wash. At roughly 1:250, one 500 ml bottle of this car wash shampoo makes about 125 litres of working solution — a shampoo for car work that goes a long way, which is why it is supplied as a concentrate rather than ready to use.

Can I run this foam car cleaner through the foam gun or PA bottle I already use?

Yes — both are the intended tools. Set the gun for a wet, clinging foam rather than a stiff, dry one. If the foam slides off the panel within seconds the mix is too weak; if it will not flow out of the gun at all it is too strong. Adjust in small steps and note the setting that suits your water.

What happens if the foam dries on the panel before I rinse?

It leaves a film that takes more work to shift than the dirt did. Work in the shade, keep each panel wet and re-wet the edges with the gun as you go. Treat any car wash cleaner the same way on a hot day: shorter dwell, one panel at a time, and rinse before it flashes off.

Is this a car wash and shampoo in one, or do I still need a separate wax?

It does both jobs at the wash stage — a car shampoo with wax in the formula, so panels come out with slip and a light gloss instead of a stripped finish. It does not replace the protection step: follow with the car washing waterproof agent, a wax or your usual sealant once the paint is clean and rinsed.

Do I have to use a wash glove, or is the foam enough on its own?

For a car that has only picked up dust, a foam wash and a thorough rinse can be enough. Once there is real road film, insect residue or tar speckling, agitate with a thickened wool glove — the foam will have loosened the film by then, so the pass is light. Rinse the glove in clean water between sections instead of carrying dirt back onto the paint.

How does this sit alongside your other car care products?

It is the first step of the sequence. Behind it are the waterproofing line, the wax range and the coatings, so a shop, distributor or private-label brand can build a complete shelf from one supplier instead of mixing sources. Tell us which finish you are selling and we will confirm the follow-up product that matches it.