Facebook
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315

Polisher Rack T-315

No.T-315
Eco-friendly PP rack that keeps a polishing machine off the workbench: wall mounted, black, OEM supported. Ideal for detailing bays and car wash shops.
Keyword:
Wall-mounted polishing machine rack
Certification:
GS
Material:
Eco-friendly PP
Color:
Black
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315
  • Polisher Rack T-315

Description

Product Overview

A wall mounted polishing machine rack that keeps a polisher off the bench and within arm's reach of the panel. It fixes flat against the bay wall, so the machine hangs clear of the worktop instead of lying on it between passes.

Benches in a working bay fill up quickly with machines, pads, bottles and cables. Hanging the polisher gives that surface back to prep work and leaves the tool where the next technician expects to find it.

There is no power source and no air line on this rack. It is a passive holder, so it can go up on any suitable wall in the bay without waiting for an electrician or a compressor drop, and there is nothing on it to switch on or service.

A detailing polisher rack stays with one machine. Technicians lift the tool out at the start of a pass and set it back when the panel is finished, which keeps pads, backing plates and cables from drifting between bays.

As a wholesale polishing machine rack supplier we ship the rack on its own or together with the machines it is built to hold, in the same order and the same shipment.

Material & Build

The body is moulded in eco-friendly PP and finished in black, a combination chosen for a bay where water, polish sling and solvent fumes are part of the working day. An oem wall mounted polisher rack order can carry your colour or branding on that body, with the scope agreed before production.

The front is cut away rather than built as a flat shelf. That opening is the working mechanism of the pp polishing machine bracket: the machine drops in, the shape of the body holds it, and nothing has to be unclipped before a pass.

One moulded piece with no hinge, no spring and no sliding part is what makes the detailing polisher rack durable in daily use — there is nothing to work loose and nothing to adjust after a few hundred passes.

PP also decides how the rack ages. It does not rust, it does not need a painted finish to stay presentable, and the polisher rack holder wipes clean with mild detergent and water when polish dust settles on it.

Machine Compatibility

  • Rotary polishers and dual-action machines with a standard body sit in the cut-out of the pp polishing machine bracket. The wall mounted polishing machine rack is shaped around the machine body rather than around one brand.
  • The machine hangs head-down with the backing plate facing out, which keeps the pad away from the wall and lets it air between passes.
  • The cable drops through the side slot instead of hanging over the front, and that is the part of the polisher rack holder that keeps the cord off the floor.
  • There is room below the opening for a backing plate or a spare pad, so the pad stays with the machine it belongs to.
  • Other power tools with a similar body diameter can sit in the same opening, but check the fit before you rely on it for daily use.
  • If you are shortlisting a wholesale polishing machine rack for a range of machines, send the body sizes and we will tell you which ones the opening suits.

Wall Mounting & Bay Layout

  • Mount it at a height where the polisher head clears the bench top and the handle sits near shoulder level, so nobody has to lift the machine overhead to hang it.
  • Position the rack at the end of the bay nearest the panel rather than behind the vehicle, and keep the run to the socket or cable reel short so the cord never crosses a walkway.
  • Check the wall before drilling. Masonry or a framed wall carries a rack and a machine far better than a hollow partition, and the anchors should match the wall you actually have.
  • A single-bay shop usually needs one car polisher wall mount rack beside the polishing area; a second machine can wait until there is a second position to hang it.
  • Shops building out a wholesale polishing machine rack order plan the wall first and take racks in the same shipment as the machines, so every polisher has a home on day one.
  • Keep the rack above the direct spray line in a wet wash bay. Damp air does no harm, but a constant soaking is not what this fitting is meant for.
  • In a multi-bay unit, one rack per polishing position stops two technicians working around the same machine and makes it obvious when a polisher has been left on a bench.
  • Choose the position.
  • A car polisher wall mount rack performs effectively at the end of the bay nearest the panel, at a height where the handle reaches your hand without a stretch.
  • Hold the panel against the wall, check it is level, and mark the mounting holes.
  • Drill and fix the panel with anchors suited to the wall.
  • A fixing kit is not listed with the rack, so either confirm what comes in the carton or use your own.
  • Test the panel by hand before hanging anything on it — it should feel rigid, with no movement at the corners.
  • Set the machine into the opening. The pp polishing machine bracket holds it by the body, head-down, with the handle facing out. Route the cord through the side slot, check it clears the machine body, and leave a little slack at the plug end.
Black wall-mounted holder rack for pressure washer accessories

Specifications

SpecificationDetail
ModelT-315
Product typeWall mounted polisher rack
MaterialEco-friendly PP
ColourBlack
FinishMatte black
MountingWall mounted
Intended useHanging a polishing machine
Power sourceNone required
Unit weight5.8 kg
CustomisationOEM supported
CertificationGS
Place of originGuangdong, China

Sampling, Packing & After-Sales

  1. Ask the polisher rack manufacturer's sales contact about a sample of the car polisher wall mount rack and check the opening against the machine you will actually hang. Once a sample is approved, it becomes the reference the bulk order is compared against.
  2. For an oem wall mounted polisher rack order, carton artwork, logo and shipping marks are proofed and signed off before the cartons are printed, so nothing is decided on the press.
  3. Before dispatch the consignment is checked against the order — item counts, carton marks and the documents that travel with it. If your market asks for CE or a separate safety report to sit alongside the certification we hold, raise it early so the paperwork is ready before the shipment.
  4. After delivery, quote the order reference and the batch details from the carton if anything is short or damaged, and add photos or a short video. That is what lets us trace the batch and answer properly.
  5. Issues are settled against the approved sample and the order, so the conversation starts from what was agreed rather than from memory.

Ordering & Delivery

ItemDetail
Order quantity30 pcs
Carton quantity30 pieces per carton
Single package size15 × 8 × 8 cm
AvailabilityIn stock and fast shipping
Warranty3 years
CustomisationOEM supported
PaymentConfirmed in the quotation
BalanceConfirmed before dispatch
DocumentsPacking list and invoice travel with the shipment
Mixed ordersConsolidated with polishers, pads and chemicals
SupportYour sales contact confirms item availability and the shipping plan

Scale & Supply Capability

SURAINBOW is run by Guangzhou Liangdian Automotive Supplies Co., Ltd., a factory-trade operation set up in Guangzhou in 2010 and now 50 people strong. Sixteen years in car care have given us a one-stop supply position: our own SURAINBOW lines are held in stock for fast shipping, and an associate factory with modern production equipment and an established quality management system keeps replenishment moving. We take OEM and ODM work and our R&D team develops to your specification. Buyers in the Middle East, the United States, Southeast Asia, Europe, the UK, Russia, Africa and Australia already order from us.

FAQ

Which polishing machines fit this rack?

Rotary polishers and dual-action machines with a standard body sit in the cut-out, and the wall mounted polishing machine rack holds them head-down by the body rather than by the pad. Bodies differ between brands, so send the model and body dimensions of the machine you use and we will confirm the fit before you commit.

Can the rack be supplied with our own branding?

OEM support is part of the product, so an oem wall mounted polisher rack run can be discussed around your colour, logo or carton artwork. The exact scope — what changes, what stays standard and what it does to the schedule — is agreed with your sales contact before production.

Do we need one rack per machine?

Yes. One opening holds one machine, and a single-bay shop normally starts with one car polisher wall mount rack. Shops with several polishing positions take one per machine so nobody has to fetch a polisher from another bay mid-job.

How is the machine held in place?

The cut-out does the work: the machine drops into the polisher rack holder and rests on the shape of the body with the handle facing out. No strap or clip is listed for this rack, so if your machine has to be locked down, tell us before you order.

Can it hold other power tools as well?

The opening is sized around polishing machines, so a detailing polisher rack is the main job. Other power tools with a similar body diameter can sit in it, but check the fit against your own tool before relying on it every day.

Does the rack need power or an air line?

No. The T-315 is purely a place to hang the polisher, so the machine still draws power from its own lead and socket in the usual way; the rack neither supplies nor stores energy. That leaves you free to choose the wall position around the technician's reach and the panel, rather than around a socket, isolator or air outlet. There is no lead to coil at the end of a shift, no hose to drag across the floor and no coupling to check for leaks, which keeps the area around the polishing position tidier. Cleaning is a simple wipe-down of the holder; there are no connectors, terminals or air fittings that need special care. If the bay layout changes, the rack can be unscrewed and moved to another suitable wall without rerouting services, though the new wall and fixings should be checked before drilling. For a distributor, there are no electrical or pneumatic spares to add alongside it. Shops that do not have compressed air piped to every wall can still use it wherever a polisher is needed.